Torvapor e-liquid
+4
Dom
gabriel p
Brahma
Hbeatz
8 participants
Page 1 sur 1
Re: Torvapor e-liquid
Pas trop cher!! C'est du Dekang?
J'ai tendance a me mefier quand c'est pas cher
J'ai tendance a me mefier quand c'est pas cher
Brahma- Admin
- Messages : 2600
Date d'inscription : 04/08/2012
Age : 68
Localisation : St-Jean-sur-Richelieu
Re: Torvapor e-liquid
J'pas sur pour vrai que c'est du dekang ... Parce qu'ils on deja une section chinesse eliquid .. Sa a d'l'air d'etre US comme liquids ... Entk j'trouve que celui que j'ai ce vape tres bien .. J'va en essayer d'autre a ma prochaine commande ... Y'ont 118 saveurs quand meme ..
__________________________________
SUBOHMMMMM
Re: Torvapor e-liquid
Si j'ai bien bien compris quand c'est du dekang cela vient de chine.Brahma a écrit:Pas trop cher!! C'est du Dekang?
J'ai tendance a me mefier quand c'est pas cher
gabriel p- membre actif
- Messages : 190
Date d'inscription : 05/08/2012
Age : 52
Localisation : st-jérome
Re: Torvapor e-liquid
Pas juste ça, c'est cheap aussi et à la limite ça goûte la mar...
Dom- membre actif
- Messages : 462
Date d'inscription : 04/08/2012
Age : 48
Localisation : L'Épiphanie
Re: Torvapor e-liquid
About Topvapor e-Liquid
[Vous devez être inscrit et connecté pour voir cette image]
Partial picture of e-Liquid production room 1 located in Mooresville, NC
Topvapor e-Liquid is created here at our facility in North Carolina.
We are an FDA registered facility (Reg #: 19604804724) and follow cGMP standards as well as Food Safe Guidelines.
Our process for making e-Liquid is consistent with or exceeds industry standards.
We use USP Grade Propylene Glycol and USP Grade Vegetable Glycerin, sourced from US Distributors. Our nicotine is sourced from USA, China and India.
Each Nicotine batch comes with a laboratory analysis and we also perform random batch testing for contaminants..
Our technicians wear appropriate apparel including, lab coats, hair nets, gloves and safety glasses. All of our technicians are Food-Safe trained.
Our room is built with all FDA Food Prep Approved materials including:
Sealed quarry tile floor
Epoxy coating walls with waterproof, mold resistant, bacteria resistant wall panels.
FDA Food grade compliant ceiling tiles
FDA stainless steel food grade surfaces and shelving
4 compartment sink for cleaning and sanitation
Commercial refrigeration for storage
Climate controlled room.
Laboratory/Food Grade containers, mixing supplies, pumps, handling systems
Room floors, walls and surfaces are cleaned daily with sanitizing agents.
Our order process for e-Liquid is followed consistently and has minimal room for error:
Using our proprietary software, the barcode on the order picking list is scanned.
e-Liquid labels are produced from the scanning process with the following data:
Bottling Date
Order Number
Flavor
Bottle Size
Strength
Warning
Barcode
Nicotine is dispensed accurately into bottles using filling syringes, bottle top measuring dispensers or automated methods.
Technicians then take the labels and fill the bottles to the specifications on the label and complete the order.
Our e-Liquids are based on alcohol based extracts instead of PG based extracts. We natural organic flavor extracts and concentrates. The Topvapor line was created as a result of looking for an e-Liquid that wasn't quite so strong in flavor as some of the China e-Liquids. TopVapor e-Liquid has been produced since 2009 and continues to be a popular item.
New flavors are added all the time and we continually try to grow and improve our process.
[Vous devez être inscrit et connecté pour voir cette image]
Partial picture of e-Liquid production room 1 located in Mooresville, NC
Topvapor e-Liquid is created here at our facility in North Carolina.
We are an FDA registered facility (Reg #: 19604804724) and follow cGMP standards as well as Food Safe Guidelines.
Our process for making e-Liquid is consistent with or exceeds industry standards.
We use USP Grade Propylene Glycol and USP Grade Vegetable Glycerin, sourced from US Distributors. Our nicotine is sourced from USA, China and India.
Each Nicotine batch comes with a laboratory analysis and we also perform random batch testing for contaminants..
Our technicians wear appropriate apparel including, lab coats, hair nets, gloves and safety glasses. All of our technicians are Food-Safe trained.
Our room is built with all FDA Food Prep Approved materials including:
Sealed quarry tile floor
Epoxy coating walls with waterproof, mold resistant, bacteria resistant wall panels.
FDA Food grade compliant ceiling tiles
FDA stainless steel food grade surfaces and shelving
4 compartment sink for cleaning and sanitation
Commercial refrigeration for storage
Climate controlled room.
Laboratory/Food Grade containers, mixing supplies, pumps, handling systems
Room floors, walls and surfaces are cleaned daily with sanitizing agents.
Our order process for e-Liquid is followed consistently and has minimal room for error:
Using our proprietary software, the barcode on the order picking list is scanned.
e-Liquid labels are produced from the scanning process with the following data:
Bottling Date
Order Number
Flavor
Bottle Size
Strength
Warning
Barcode
Nicotine is dispensed accurately into bottles using filling syringes, bottle top measuring dispensers or automated methods.
Technicians then take the labels and fill the bottles to the specifications on the label and complete the order.
Our e-Liquids are based on alcohol based extracts instead of PG based extracts. We natural organic flavor extracts and concentrates. The Topvapor line was created as a result of looking for an e-Liquid that wasn't quite so strong in flavor as some of the China e-Liquids. TopVapor e-Liquid has been produced since 2009 and continues to be a popular item.
New flavors are added all the time and we continually try to grow and improve our process.
__________________________________
SUBOHMMMMM
Re: Torvapor e-liquid
Ils ont shippé le Dekang et leur brigade bridée aux States, pour faire plus américain ! lol
Valdoo- membre actif
- Messages : 2064
Date d'inscription : 30/08/2012
Re: Torvapor e-liquid
Tiens nous au courant c'est quand même intéressant. Shippé avec ou sans nic?
Ugot- membre actif
- Messages : 587
Date d'inscription : 08/08/2012
Age : 50
Localisation : Ville de Québec.
Re: Torvapor e-liquid
J'ai commandé des échantillons Lundi le chiping est long et leur liquide est 80% VG/20% PG tout le contraire ce que l'on voit habituellement.
gabriel p- membre actif
- Messages : 190
Date d'inscription : 05/08/2012
Age : 52
Localisation : st-jérome
Re: Torvapor e-liquid
T'aurais du prendre le fedex , c'est livré avant midi le lendemain
__________________________________
SUBOHMMMMM
Re: Torvapor e-liquid
J'ai vu aussi qu"ils on du 50pg/50vg aussi !
Paco01- membre actif
- Messages : 668
Date d'inscription : 21/08/2012
Localisation : la pute
Re: Torvapor e-liquid
Wow ça c'est pas cher.. vendu!!
Je pense bien me commander:
Root beer
Vanilla Latte
Pêche (Mais j'ai un choix à faire entre 3 saveurs..)
Je pense bien me commander:
Root beer
Vanilla Latte
Pêche (Mais j'ai un choix à faire entre 3 saveurs..)
franky_592- Messages : 7
Date d'inscription : 07/08/2012
Age : 33
Localisation : Montréal
Re: Torvapor e-liquid
Oui saveur tabac.Paco01 a écrit:J'ai vu aussi qu"ils on du 50pg/50vg aussi !
gabriel p- membre actif
- Messages : 190
Date d'inscription : 05/08/2012
Age : 52
Localisation : st-jérome
Sujets similaires
» Future "vaperesse" ou vapoteuse !!
» E-liquid et gel
» TopVapor E-Liquid
» Menthol liquid
» E-Liquid sans PG ni VG
» E-liquid et gel
» TopVapor E-Liquid
» Menthol liquid
» E-Liquid sans PG ni VG
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum